IMPORTANT INFORMATION This manual is designed for use by factory trained installers and operators of the Fire Control Instruments, Inc. (FCI) 7200 Series Fire Alarm Control.All illustrations, functional descriptions, operating and installation procedures, and other relevant information are contained in this manual. Gamewell-FCI 7200 Doc. Ver: 1.00 FS-8700-110 Rev: 6 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: support@fieldserver.com Page 5 of 5 7.2 Panel Synchronization Manual synchronization is required.
Retrofit kit easily upgrades aged 7200 Series systems to latest technology
Fci 7200 Installation Manual User
To learn more about the FCI 7200 Retrofit Kit and E3 Series fire alarm and emergency communications systems, contact a local Gamewell-FCI Regional Manager or call 203-484-7161. FCI reserves the right to change hardware and/or software design, which may subsequently affect the contents of this manual. FCI assumes no responsibility for any errors that may appear in this manual. Neither this manual nor any part of it may be reproduced without the advance written permission of Fire Control Instruments, Inc. Page 5: Installation Basics CM7200 Master Guide Installation Basics If you are new to installing Firstech Series Remote Starts and/or Alarms, we highly recommended that you thoroughly review this manual to installing your first unit. Remote Programming: You must.
NORTHFORD, Conn., August 14, 2012 - Gamewell-FCI by Honeywell has developed a cost-effective kit for upgrading FCI 7200 Series fire alarm control panels to the latest, code-compliant technology of an E3 Series fire alarm and emergency communications system.
The ease of installation provided by the 7200 Retrofit Kit, combined with the expandable capacity and backward compatibility inherent in E3 Series systems, can enable facilities to upgrade legacy systems to provide more sophisticated and reliable fire protection. The Retrofit Kit greatly minimizes costs by allowing the electrical components of a new E3 Series system to be installed within the existing 7200 panel's backbox, in addition to utilizing the existing detectors, strobes, speakers and other System Sensor devices.
Fci 7200 Programming Software
'When changing out just the panel, we typically need two techs and an electrician onsite to mark wires, disconnect the panel, pull-off the cabinet, and then start the process of installing the new one,' says Duane Hannasch of Fire Alarm Control Systems, Inc. in San Antonio, Tex., a Gamewell-FCI ESD (Engineered Systems Distributor). 'Depending on the size of the job, this new kit could easily save the customer $500 to $1,500 or more, just in labor to switch out one panel.'
The 7200 Series was introduced to the US market in the early 1980s and ceased production in 2005. Gamewell-FCI approximates more than 15,000 units were installed over its last eight years of production.
Fci 7200 Programming Manual
'It's a lot easier to expand the system and add more devices and capabilities when you're working with a scalable system like the E3 Series,' says Hannasch. 'And if you're re-using the wire and devices already there, it's easy to change out devices and add new features as budgets allow.'
While many facilities are searching for a means to keep fire alarms compliant with codes and ADA (American's with Disabilities Act) requirements, others seek newer capabilities, such as gas detection and mass notification.
'Buildings with 7200s already in them have innumerable options when it comes to utilizing the latest technology to reduce false alarms, add voice evac and emergency communications capabilities, and improve the looks or aesthetics of the system,' exclaims Gamewell-FCI Product Marketing Manager, Brian Carlson.
Numerous facility types across the US are ideal candidates for FCI 7200 upgrades utilizing the new Retrofit Kit. Gamewell-FCI ESD Advanced Safety Systems outside of Boston, Mass., has identified several potential sites that are looking to upgrade.
'We have a number of hospitals and schools that can be easily upgraded, but the customer that needs it the most here is a temple that's looking to expand,' says Mike Beatrice of Advanced Safety Systems. 'They're maxed-out on capacity, which is common on these systems. And the voice evac is currently a separate system. Once upgraded, everything will be integrated into one system that can be added onto in stages.'
Recent tragedies, such as the Colorado theatre shooting, have apparently placed more pressure on facility owners to consider adding or improving systems for sending emergency communications to people in and around a facility, according to Carlson.
'We're no longer seeing just larger facilities looking to communicate with occupants during an emergency. Smaller buildings of assembly need the same features, but in a tighter package,' Carlson states. 'This retrofit kit allows those older 7200 systems to jump light years ahead in technology to serve as both a fire alarm and emergency communications system within the same cabinet,'
Gamewell-FCI's E3 Series fire alarm and emergency communications systems provide advanced fire protection and autonomous control of in-building and outdoor emergency communications. This combined approach offers an economical and completely supervised system, designed to be highly survivable and to meet stringent requirements surrounding performance, testing, maintenance and power back-up. The capability to create and send distributed recipient notifications via email, SMS text alerts, computer pop-ups and even cable television systems can also be accomplished through Gamewell-FCI technology offerings.
To learn more about the FCI 7200 Retrofit Kit and E3 Series fire alarm and emergency communications systems, contact a local Gamewell-FCI Regional Manager or call 203-484-7161. Visit www.gamewell-fci.com for case studies and more in-depth technical information.